APEX435 Wide Diaphragm Condenser
Rugged construction, high SPL handling in a compact
chassis makes the Apex435 an ideal choice for live sound reinforcement or live
recording applications. It is also an ideal choice as a utility microphone for
home or project studios where performance is required, yet budget is a
concern.
The Apex435 uses the same proven capsule and electronics
of the popular Apex430; however it is mounted in a lighter, more compact
chassis. Its ideal applications can be overhead mic for drum kits, for guitar or
bass cabinets where superior sound quality and high sound pressure handling is
required. It is also the microphone of choice for saxophones, flutes, brass or
woodwinds, acoustic guitars or acoustic bass where subtlety and clarity is
paramount.
In live sound applications and remote recording Apex435's
cardioid pattern offer excellent feedback rejection and better isolation and
will give you the best results on most vocal applications and a wide range of
instruments including brass and woodwinds, acoustic stringed instruments, drums
and percussion.
The Apex435 is a professional medium diaphragm dual
pattern, pressure gradient condenser microphone with an internal -6dB 100Hz low
frequency cutoff switch. A 1-inch diameter capsule delivers frequency response
is 20Hz to 20kHz with a maximum SPL of 140dB (1kHz @ 0.5% THD). Input
sensitivity is -40dB @ 1kHz and signal to noise is better than 73dB. Impedance
is 200 ohms and the operating voltage is 48V DC.
The Apex435 microphone is made with a heavy-duty aircraft
grade machined brass body with a durable, scratch resistant anodized finish and
are shipped with a quality Apex IMC-3 'cat's cradle' style shock mount mic stand
adaptor.
Specifications:
-
Type: Wide Diaphragm Condenser Microphone
-
Polar Pattern: Cardioid
-
Frequency Response: 20Hz - 20kHz
-
Sensitivity: 14mv/Pa = -40dB (0dB = 1v/Pa) -40dB
-
Impedance: <200 Ohms
-
S/N: 76dB
-
Max SPL: (For .05% THD @ 1000Hz) 140dB
-
Equivalent Noise: (IEC 268 - 4 - A weighted) 24dB
-
Included Accessories: IMC-3 Shockmount
-
Dimensions: 6 x 1.75 in / 152 x 45 mm
-
Weight: 13 oz / 362 g