Small Capsule FET Microphone

The AVANTONE “Cabernet (C-series)” mics from AVANT ELECTRONICS are designed to offer true professional performance. They will meet or surpass the performance and specifications of much higher priced mics.

The AVANTONE CK-1 is truly a gorgeous looking and sounding microphone. The design, character and performance can be compared directly to fine studio-standard FET mics…but at a fraction of their cost!

Our rugged CK-1 microphone body and capsule assembly are precision machined of BRASS.

Aesthetically the compact body features an elegant Metallic Cabernet Wine-Red finish, accented with polished nickel trim and capsule assembly.

The high quality FET circuitry will yield pleasing professional results comparable to much more expensive designs.

Any studio can proudly offer the CK-1 for instrumental and percussion miking…It exudes class visually as well as sonically.

The CK-1 is equally at home on the stage for drum overheads, acoustic instruments and piano.
The CK-1 INCLUDES (3) 19mm interchangeable capsules to provide unlimited miking possibilities!

Manufactured using the finest materials yielding a very solid feel, superb structural integrity and rugged reliability.

The rugged CK-1 mic is able to produce professional results with a clean sonic character.

The 3 capsules (cardioid, omni, and Hyper-cardioid) offer versatility for accommodating virtually any miking task.

The included SSM Shockmount is superb in allowing a precise positioning of the mic while inhibiting the transfer of unwanted vibrations up into the mic. This isolation allows for superior professional results.

Separate -10 dB pad & 80 Hz LF roll off switches

Uses include

• Cymbals, Hi-Hats, acoustic guitar, drum overheads, piano, percussion etc…
• The -10dB attenuation switch can be engaged when miking very high SPL sources to keep from overloading the electronics.
  The 80Hz HIGH-PASS filter switch can be engaged to reduce rumble and to keep unwanted low frequencies from “muddying up” the track.
• Standard Items Supplied:
• AVANTONE CK-1 FET Microphone
• AVANTONE SSM Shockmount
• Elegant padded genuine wooden Mic box
• 19mm Cardioid, Omni, and Hyper-Cardioid capsules

Specifications

• Type: True Condenser
• Polar Pattern/s: Cardioid , Hyper-Cardioid & Omni Capsules included
• Frequency Response: 30-20,000 Hz +/- 3dB
• Output Impedance: <=200 Ohms
• Maximum SPL : 130dB (0.5% THD @1000Hz)
• S/N Ratio re 1Pa : 75dB
• Output Connector: Male XLR 3 pin
• High-Pass Switch 80 Hz 6dB/octave
• Attenuation Switch -10 dB
• Included Accessories: 3 Capsules, Padded Wooden Box & SSM Shockmount
• Power Requirement: Standard 48 Volt Phantom
• Dimensions: (23mm) x (153mm)
• Weight: 5 oz.
• Finish: Polished Nickel trim / Metallic Cabernet Red Body