Allen and Heath - XONE 02 Stereo Pro-Turntablist DJ Mixer

Key Features:

XONE 02 Stereo Pro-Turntablist DJ Mixer

From inputs to outputs, Allen & Heath created XONE:02 to be the world’s greatest battle / scratch mixer. Every fader is a deluxe VCA design: they’re all reversible, they all have contour controls, and they can all be easily replaced by removing the steel faceplate. Allen & Heath kept the fader area clear for action and kept controls like pan and EQ out of the way on low profile sliders. Even the transform switches can be rotated to work the way you like them.

2 Dual Stereo Channels

• Channels have RIAA [RCA] inputs, switchable to line, plus stereo line level inputs [RCA], each with gain control. Powerful 3 band ‘music’ EQ on sliders. High quality 45mm faders. Input reverse switch for battle mixing. Pre fade monitoring on 12 segment 3 color peak reading bar meters

Mic Channel

• 2 XLR inputs with separate gain controls, on switch and 3 band EQ with HPF. Routes direct to mix outputs. FX insert on button

Stereo Mix Outputs

• Balanced mix outputs on XLR with multi-point VCA level master control. The mix output level can be displayed on the 12 segment 3 color peak reading bar meters

Booth Output

• RCA outputs with level control for booth / link out to additional ‘daisy-chain’ mixers

FX Loop

• Channels have an effect loop on switch with silent FET switching. Effect insert points are separate [TRS] inputs and outputs

3 Band EQ

• Powerful 3 band 12dB/oct EQ with ëasymmetricí characteristic: +6dB boost emphasis and -26dB cut for frequency band elimination

Penny&Giles VCA Crossfader

• Ultra-high quality Penny & Giles conductive plastic crossfaders come as standard on the XONE:02. The 45mm faders contour control, reverse switch and led. Replacement of crossfaders is easy - it takes only minutes to remove the faceplate and replace the fader unit

Transform Switches

• Performance channel mute controls which can be rotated to work up/down or left / right

Engineer / DJ’s Toolbox

• High powered headphone output with level and mute switch. Booth / link output on TRS with level. 12 segment 3 color bar metering displays CH1&2 or mix. Channels have 12 segment 3 color bar meters. CH1 / CH2 cue fader allows preview of x-fades

Options

• Conductive plastic Penny & Giles x-fader

Connections:

Inputs

• Turntable RCA RIAA Equalization (Switch-able toline) 2-140mV 47K/330pF
• Line RCA >8k2 ohms -15 / +22 dBu
• Effect Return TRS jack 10k ohms 0dBu
• Link IN RCA 10k ohms 0dBu
• MIC XLR <2k ohms Balanced -10 / -50dBu

Outputs

• Main Out XLR <47 ohms Balanced 0dBu
• Effect Send TRS jack 47 ohms Impedance Balanced 0dBu
• Link/Booth RCA 47 ohms 0dBu
• Headphones 30-600 ohms, 75ohms recommended, Jack, Tip =left, Ring = right 500mW RMS into 47 ohms

Technical Specifications:

• OdBu = 0.775 Volts rms +4dBu = 1.23V rms
• OdBu = 1 Volt rms -10dBV = 316mV rms

Maximum output level

• Main Out +23dBu into >2K ohm load
• Effect Send +21dBu into >2K ohm
• Link/Booth +21dBu into >2K ohm

Internal headroom

• Channels +21dBu
• Mix to output +23dBu
• Peak indicators meters
• 12bar peak reading Peak on 8dB before clipping

Frequency response

• 20Hz-30kHz 0/-1dB

Distortion THD+noise measured at +10dBu 1kHz

• 0.04%

Crosstalk channel shutoff measured at 1kHz

• <90dB

MIC EI Measured with 150ohm load

• 129dB

Residual output noise - non weighted 22Hz-22kHz filter

• <88dBu

Mix noise - non weighted 22Hz-22kHz filter

• <-81dBu

Power Supply Internal switch mode power unit with auto sensing mains input

• Mains In socket IEC 3 pin
• AC Mains 100-240V AC 50/60Hz
• Power lead Country dependent
• Consumption 30W max
• Fuse Rating T500mA 20mm
• Internal power rails +/- 16volts